SOLVING PROBLEMS
The display messages that appear on
your ONE TOUCH
will guide you through testing proce-
dures, alert you to any problems as
they occur, and give you information
about test results stored in the meter's
memory. This section provides you
with a complete listing of the display
MESSAGE
APPEARS WHEN
code10
The meter is first turned on. The code number (1 – 16) must match the
code number on the test strip vial or be reset.
7 : 2 6am 6-01-95
insert
The meter is ready to perform a blood, check strip, or control solution test.
code 10
strip
wait
The meter is performing internal checks.
please
Profile
Meter
®
®
messages, what they mean, and what to
do if there is a problem.
Test Procedure Messages
These messages appear during routine
testing. Follow them carefully and they
will guide you through the test.
74