Table of Contents
Advertisement
■ Pattern Setting：
P/T Function Setting
Pattern
Patrol
Scan
Home place
Auto flip
On
Tilt Max speed 110
Pan Max speed 120
Preset speed
124
Setup Pattern 1：
●
Remarks：
All the pattern recording methods are the same, so we take "Setup Pattern 1"
as example.
Operating method as follows:
1、Call preset 95 or 64 to enter into the main menu
、
2
Move the cursor to choose 【
the iris order) for confirmation, enter into "P/T Function Setting
Items"
3、Move the cursor to choose 【
【OPEN】 key (open the iris order) for confirmation, enter into
"Pattern Setting Items"
4、Move the cursor to choose 【
Pattern】
. Press【OPEN】 key (open the iris order) for
【
confirmation, enter into "Setup Pattern 1 Setting Items" At this
time, the dome will exit the main menu and enter into Pattern 1
Recording Condition and the words "Save Pattern" will appears
on the screen's left upwards.
5、 Meanwhile, to operate the dome according to the users' former
recorded track, The running track will be saved during this time.
6、 "Call preset 95"can stop the present pattern record, and the
words "Save Pattern" will disappear.
Remarks
：All the pattern recording methods are the
same, if you want to rerecord a new pattern,
you can juat repeate the above steps from
1-6.
English
Pattern Setting
Setup Pattern 1
Setup Pattern 2
Setup Pattern 3
Run Pattern 1
Run Pattern 2
Run Pattern 3
Pan
】 . Press 【OPEN】 key (open
Pattern】in the
Pan
【
Setup Pattern 1】in the
P/T Function Setting
● Setup Pattern1
● Setup Pattern 2
● Setup Pattern 3
● Run Pattern 1
● Run Pattern 2
● Run Pattern 3
Camera
Pan
Info
Alarm
Self act
Lerisure Time
】. Press
Address
System reset
P/T Function Setting
Pattern
Patrol
Scan
Home place
Auto flip
Tilt Max speed 110
Pan Max speed 120
Preset speed
Pattern Setting
Setup Pattern 1
Setup Pattern 2
Setup Pattern 3
Run Pattern 1
Run Pattern 2
Run Pattern 3
Main Menu
Nothing
005
001
On
124
55
Advertisement
Table of Contents
