Connection; Connecting To A Terrestrial Antenna; Connecting To Tv With Hdmi Cable; Connecting To Tv With Scart Cable - Strong SRT 8114 User Manual

Digital terrestrial hd receiver

Table of Contents

3.0 CoNNECTIoN

To receive broadcasted signals, your terrestrial indoor or outdoor antenna must be connected to the

ANT IN connector on the back of the receiver. Use a properly shielded antenna cable and suitable

connectors.

The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set.

Please consider that the looped signal might be too weak if you use an active antenna.

NoTE:

The TV set shall be connected with the receiver using a good quality HDMI cable. This connection

gives the highest possible quality.

Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to

the receiver using a good quality SCART cable.

By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best

possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital

Audio Amplifier or home theatre system with a suitable cinch cable to the S / PDIF connector on the

back of the receiver.

3.5 Connecting to a digital audio amplifier and Tv using

hDMI

By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy

the best possible sound quality and multi-channel audio (depending on broadcast). Connect the

HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output of the

amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes.

If the signals at your location are too weak to receive proper signals with

an indoor antenna, we recommend using an outdoor antenna which can

be pointed towards the transmission tower. Ask your local dealer for more

information.

Fig. 6

Table of Contents

Show Quick Links

Table of Contents