Strong SRT 8114 User Manual page 20

The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the file containing the latest and correct software.
Once all settings are made, move the highlight to Start and press ok to start the upgrade process.
After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade
or No to quit without upgrading.
NoTE:
Warning:
7.4.5 Channel Dump and Load function
This feature allows you to load a channels list quickly and use a channel list that previously was
created on this (backup) or another receiver from the same model via the USB port. This is useful
when more receivers have to be installed in the same region, thus omitting a full scan and (optional)
sorting of channels. It is also useful as a backup for your own unit.
Channel Dump function (backup to USb)
Have a storage device connected to the USB port of the receiver. Select Upgrade by USB from the
Tools menu and press ok to proceed. The upgrade menu will now be displayed.
Use pq to select Update Mode and choose the option Dump channel list.
Use pq to select Upgrade File. A DataBase file name containing date and time will be presented,
format DBYYYYMMDDHHMM (DateBaseYearMonthDateHourMinute.udf).
Use pq to select Start and press ok to proceed. The channel list and favourites will be saved.
Update Channel list function (read from USb)
Have the storage device connected to the USB port of the receiver, containing a previously made
channel list on this unit or another of the same model. Select Upgrade by USB from the Tools menu
and press ok to proceed. The upgrade menu will now be displayed.
Use pq to select Update Mode and choose the option Update Channel list.
Use pq to select Upgrade File. Select the correct database file name, format DBYYYYMMDDHHMM
(DateBaseYearMonthDateHourMinute.udf).
Use pq to select Start and press ok to proceed. Confirm the upgrade with ok to proceed.
Warning
After completion, the unit will reboot and come back with the first channel in the new channel list.
18
If, after a software upgrade, the receiver should behave in an unexpected
way, please perform a factory reset as well. See chapter 7.4.2.
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
Old channel list and favourites will be overwritten.