Strong SRT 8114 User Manual page 17

Press pq to highlight the menu of choice and press ok advance to the next screen. Use pq to
move the highlight to the setting of choice. Values can be changed with tu. Press EXIT to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
Subtitle Language :
Teletext:
Subtitle:
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely subtitles can be activated via Teletext
if available.
7.3.2 Tv System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Aspect Mode:
Connection:
Digital Audio Output:
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region:
GMT Usage:
GMT Offset:
Use tu to select the language for the On Screen Display.
Use tu to select Audio language.
Use tu to select a language that will be played when the language selected
at First Audio isn't available.
Use tu to select the preferred subtitle language.
Use tu to select the preferred Teletext language (when available).
Use tu to select the preferred subtitle type to be displayed automatically.
Select Normal, Hard of Hearing or Off*
Use this option to select the video resolution of your TV screen. Options are:
By Source (automatic detection of video resolution offered to the receiver),
By Native TV (automatic detection of maximal resolution of TV screen), and
manual selections 480i, 576i up to 1080p Please use a setting that matches
your TV's specifications. After a selection is made, you will be asked to
confirm. Selection above 576i is only applicable on HDMI output.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and
16:9 (use this setting for 16:9 TV sets).
Use this option to select the connection to your TV set. Select HDMI or TV
SCART. If connection type HDMI is selected, then only the CVBS signal is
available on the TV SCART.
Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or
transfer Dolby® Digital/Dolby® Digital Plus* audio to the TV via HDMI or to a
Home entertainment system (for example) through coaxial S / PDIF.
Use tu to select the region you live in.
Set to By Region for broadcaster defined time, User Define to select manual a
GMT zone or to Off to input time and date manually.
Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to User Define.The GMT Offset range is "-11:30 ~
15