How To Use The Accessories; How To Assemble - Thane Housewares EP2120 User Manual

U S E R ' S G U I D E

HOW TO ASSEMBLE

THE H2O MOP
1) Remove Mop Head
2) Remove the Hand-Held Steamer from
locking Clip (Part 15) the H2O Mop ® Ultra
located at the bottom of
a) Unlock the Hand-Held Steamer Body
the H2O Mop ® Ultra ™ Body
(Part 13) by lifting up the Hand-Held
(Part 8) as illustrated.
Steamer Body Lock (Part 7)
b) Push the Hand-Held Steamer Release
button up (Part 6).
c) Detach the Hand-Held Steamer Body out.
4) Put back the Mop Head 5) Attach the Hand-Held Steamer to
locking Clip (Part 15) to the H2O Mop ®
lock in the Mop Head. place using the Hand-Held Steamer
Body Lock (Part 7).
Button
NOTE: To remove the Handle Tube (Part 3) Press the
Button and pull up the Handle Tube as illustrated.
ULTRA
® ™
3) Attach Mop Head (Part 16) to
™ Body as follows: the H2O Mop ® Ultra ™
8) by inserting the Swivel Joint
(Part 17) into the designated
hole in the H2O Mop ®
(Part 8) as illustrated.
6) Slide Handle Tube (Part 3)
Ultra ™ Body and lock in down into H2O Mop ®
Body (Part 8) until it clicks in.
4
U S E R ' S G U I D E

HOW TO USE THE ACCESSORIES

To use the Round Brushes (Part 4), Triangle Brush (Part 5),
Scoop Nozzle (Part 6) and the Angle Nozzle (Part 9)
attachments follow these instructions:
1. Attach the Extention Hose to the Hand-Held Steamer.
2. Attach the Jet Nozzle to the Extention Hose.
NOTE: You can attach the Jet Nozzle directly to the Hand-Held
Steamer without using the Extention Hose but for better accessibility
we recommend attaching the Jet nozzle to the Extention Hose.
Body (Part
3. Attach the desired attachment to the Jet Nozzle as follows:
Align the two pins located at the tip of the nozzle with the matching channel marked with an Arrow mark
on each attachment (Round Brushes, Triangle Brush, Scoop Nozzle and Angle Nozzle). Insert the tip of the
Ultra ™ Body
Jet Nozzle into the attachment's opening, push and turn the attachment clockwise 90° to lock in place.
arrow mark
To remove the attachment, turn the attachment counterclockwise and detach from the Jet Nozzle.
To attach the Hand-Held Steamer back to the H2O Mop
Remove all attachments
1) Insert the Power Cord in the clip on the side of the Hand-Held Steamer Body.
Ultra ™
2) Align and insert the adaptor on the Hand-Held Steamer with the nozzle at the H2O Mop
3) Push the Hand-Held Steamer against the H2O Mop
4) Lock the Hand-held Steamer by turning back the Hand-Held Steamer Body lock down.
(OPTIONAL ITEMS)
CONTINUED
pins
® Ultra ™ Steamer Body:
Ultra body until it clicks in place.
® ™
13
® Ultra ™ Body.