How To Use The Accessories; After Use; How To Assemble - Thane Housewares H2O Mop Ultra SC-393 User Manual

U S E R ' S G U I D E

HOW TO ASSEMBLE

THE H2O MOP
1) Remove Mop Head 2) Remove the Hand-Held Steamer from
locking Clip (Part 15) the H2O Mop ® Ultra
located at the bottom of
a) Unlock the Hand-Held Steamer Body
the H2O Mop ® Ultra ™ Body
(Part 13) by lifting up the Hand-Held
(Part 8) as illustrated.
Steamer Body Lock (Part 7)
b) Push the Hand-Held Steamer Release
button up (Part 6).
c) Detach the Hand-Held Steamer Body out.
4) Put back the Mop Head
5) Attach the Hand-Held Steamer to
locking Clip (Part 15) to
the H2O Mop ®
lock in the Mop Head. place using the Hand-Held Steamer
Body Lock (Part 7).
Button
NOTE: To remove the Handle Tube (Part 3) Press the
Button and pull up the Handle Tube as illustrated.
® ULTRA ™
3) Attach Mop Head (Part 16) to
™ Body as follows: the H2O Mop Ultra
® ™
8) by inserting the Swivel Joint
(Part 17) into the designated
hole in the H2O Mop
(Part 8) as illustrated.
6) Slide Handle Tube (Part 3)
Ultra ™ Body and lock in down into H2O Mop
Body (Part 8) until it clicks in.
4
U S E R ' S G U I D E

HOW TO USE THE ACCESSORIES

To use the Round Brushes (Part 4), Triangle Brush (Part 5),
Scoop Nozzle (Part 6) and the Angle Nozzle (Part 9)
attachments follow these instructions:
1. Attach the Extention Hose to the Hand-Held Steamer.
2. Attach the Jet Nozzle to the Extention Hose.
NOTE: You can attach the Jet Nozzle directly to the Hand-Held
Steamer without using the Extention Hose but for better accessibility
we reccomend attaching the Jet Nozzel to the Extention Hose.
Body (Part
3. Attach the desired attachement to the Jet Nozzle.
To attach the Hand-Held Steamer back to the H2O Mop
® Ultra ™ Body
Remove all attachments
1) Insert the Power Cord in the clip on the side of the Hand-Held Steamer Body.
2) Align and insert the adaptor on the Hand-Held Steamer with the nozzle at the H2O Mop
3) Push the Hand-Held Steamer against the H2O Mop
4) Lock the Hand-held Steamer by turning back the Hand-Held Steamer Body lock down.
® Ultra ™
1) Unplug Power Cord (Part 18) from outlet.
2) Allow Mop Pad to cool down and carefully remove Mop Pad (Part 20) from Mop Head (Part 16), as Mop Pad
could still be hot.
3) Any water remaining in the Water Tank (Part 9) should be emptied prior to appliance storage.
4) Let any water (remained as a product of condensation) drain from the steam nozzle prior to storing the appliance.
5) Wrap Power Cord around Cord Holder (Part 3).
6) Wipe all surfaces of the H2O Mop
7) Mop Pad can be machine washed in hot water. Disposable pads are designed for one time use.
(OPTIONAL ITEMS)
CONTINUED
® Ultra ™ Steamer Body:
Ultra body until it clicks in place.
® ™

AFTER USE

® Ultra ™ Steamer with a soft cloth. Store in a protected, dry area.
13
® Ultra ™ Body.