AT&T U-verse Installation Manual page 2

1 Set up
Approximate time: 5 minutes
A Locate your Wireless Gateway.
B Connect the Ethernet cable (depicted in yellow below)
from the Wireless Gateway's Local Ethernet port to your
computer's Ethernet port.
Existing Data Cable connection
Computer Ethernet Connection
Wireless Gateway
(back panel)
2
Mandatory activation
• Open your Internet browser (e.g., Internet
Explorer, Safari, etc.). The online registration
process will start automatically to assist you
in activating your service. If it does not, enter
lsreg.att.net into your address bar.
• Continue with online registration using the
4-digit passcode you created when you
placed your order—it was mailed to you
separately for your reference.
Questions?
Go online: Visit att.com/uversesupport.
Call us: Dial 1.800.288.2020 and ask for "U-verse technical support. "
To learn more about the benefits and features of your U-verse service, visit att.com/u-verse/newcustomer.
previously installed by an AT&T
technician (may or may not be
plugged into a phone jack).
Note! Wireless Gateway
power cord must be
plugged into a grounded
three-prong outlet.
Power Cord
Approximate time: 15 minutes
Adding other wireless devices
3
(optional)
Approximate time: 10 minutes
Write down your Network Name (SSID) and Wireless Network
Key (WPA) to configure a wireless device. This information is
on the side of your Wireless Gateway. The Network Name
consists of "2WIRE" plus the last three digits of the Wireless
Gateway's serial number. Be sure to record this information in
the form below.
WPA
Network Name (SSID)
2 W I R E
10-digit Wireless Network Key (WPA)
Now configure your wireless network:
• Go to your computer's "Wireless Network Settings" and
refresh the network list.
• Select your Network Name (SSID) from the list. You may
need to scroll through the list to find your SSID.
• Enter the 10-digit Wireless Network Key (WPA) in the
Password field to connect to your network.
Congratulations!
You should now be wirelessly connected to the Internet.
Stay connected on the go!
AT&T Wi-Fi Basic is included with your AT&T U-verse High Speed Internet
service, so you can access the Internet at thousands of AT&T Wi-Fi Hot
Spots across the country. Visit attwifi.com to learn more.