To fasten the unit to the factory radio mounting brackets.
1. Use a screwdriver to loose the hook's screws on the front left and right sides of
the unit and remove the hooks.
2. Align the screw holes on the bracket with the screw holes on the unit, and then
tighten the screws (5x5mm) on each side.
Note: The outer trim ring, sleeve and the metal strap are not used for method B
installation.
USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN button, then the front panel will be folded down.
2. Remove the front panel by pulling its middle-hand side outward.
79