Denon Link Setup; Pure Direct Setup - Denon DBP-4010UDCI Owner's Manual

ENGLISH
.:
-N·n a
With OENON LINK connections, no audio signals other than those of BO are output from the HOMI
terminal.
(When "OENON LINK Mode" is set to "2nd" and "HOMI Setup" - "SA-CD Audio Out" (&page 24) is set
to "On", the audio signals of Super Audio CD are output from the HOMI terminal.)
Setting contents
DENON LINK Setup
Defau.lUettings are underlined.
Setting items
[1iiJ]
Set
th.
"d;o ,;,.,1
to
b. o",p", "om tb. DENDN LINK
,"~I
..I
o
Signals Compatible with DENON LINK Setting and Transmission
The OENON LINK setting for the OENON LINK version of the connected AV Amp is as follows:
I
Setting contents
[Digital Out} : Set whether to output signals to the digital audio output
terminal.
• On..:
Enable digital audio output.
• Off : Disable digital audio output.
[Video Out} : Set option of video output.
• On : Enable video output.
• Off : Disable video output. This setting also disables audio output from
the HOM I terminal.
[Display} : Set option for front panel display.
• On : Turn on display.
• Off : Turn off display.
#'
For more information, see "Playing Back High-quality Audio (Pure Direct
Function)" (&page 38).
Makes settings regarding digital audio and video output modes during Pure Direct mode,
as well as display messages. Two types of setting can be registered.
Setting items
User Preset
1/
User Preset 2
This sets the operating mode
for "User Preset 1" or "User
Preset 2" selected by
@.
Setting each of these items
to "Off" enables output of
high quality analog signals
free of interference from the
associated circuits.
• When set to "4th", the HOMI control function becomes available from
the connected device.
• When "4th" is set and jitter-free connection is set up, audio affected
by the jitter-free function is output from the HOMI terminal during
BO playback. When playing back media other than that, video signal
is output from the HOMI terminal and audio signal is output from the
OENON LINK terminal, respectively.
• To play DENON LINK 4th signals, connect to a OENON LINK 4th-
compatible AV Amp using an HOMI and a OENON LINK cable.
• About the 4th setting of the AV Amp, see the owner's manual of the
AVAmp.
(Qffl :
Do not use OENON LINK.
[2nd} : Output digital audio using OENON LINK 2nd Edition.
[3rd} : Output digital audio using DEr--JON LINK 3rd Edition.
[4th} : Output digital audio using OENON LINK 4th Edition.
Compatible with jitter-free connection. For more information, refer to
"OENON LINK Connection
CD
Making a Jitter-free Connection" (&page
17).
• HDMI : Improve HOM I digital signal jitter.
#'
DENON LINK Mode
Set the audio output of
DENO!'J LINK.
-
~
'F.
2nd Edition
' "
~
("S.E." displayed near "2nd" x 0 0 x 0 0
terminal) ~
::>
3rd Edition
("3rd" displayed near "3rd" x 0 0 0 0 0
terminal)
4th Edition
("4th" displayed near "4th"
0 0 0 0 0 0
terminal I
Remote control operation
buttons
SETUP
CD
.Oisplaying the menu
'Cancel the menu
.Moves the cursor
'(Up/Oown/LeftJRight)
8
:Oecision the setting
RETURN
o
:Return to previous menu
28