Operating Instructions - Kobalt KHB 300-06 User Instructions

ASSEMBLY INSTRUCTIONS
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
• Replace the battery or the charger immediately if the battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before inserting or removing the battery.
• Verify that the battery is removed and the switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the blower.
• Read, understand, and follow the instructions contained in the charger manual.
2. Nozzles
The two nozzles extend the reach of the blower.
• Align the widest end of the blower tube (B) with
the front opening on the blower (A).
• Slide the tube over the blower outlet opening
until the latch on the blower is inserted into the
opening on the tube.
• Slide the blower tip (C) over the blower tube (B)
until the latch on the tube is inserted into the end
of the opening on the tip and locks into position.

OPERATING INSTRUCTIONS

1. Starting/stopping the blower
a. Press the palm lock button (F). Squeeze the
trigger switch (G) to start.
b. Release the trigger switch (G) to stop.
Note: To lock out the trigger, you can pull back
the safety lock with your thumb. To unlock the
safety lock, push it forward. When the blower is
not in use, you can use the safety lock to prevent
activation during storage or transport.
2
C
1
kobalttools.com
9
A
B
F
G