Preparation; Assembly Instructions - Kobalt KHB 300-06 User Instructions

SAFETY INFORMATION
WARNING (Proposition 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well- ventilated area, and work with approved safety

PREPARATION

Before beginning operate this product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to operate the product.

ASSEMBLY INSTRUCTIONS

1. Battery
IMPORTANT: The battery may not be fully charged,
time, place the battery in the battery charger and charge.
Make sure to read all safety precautions and follow the
instructions in the battery and charger manuals.
To install the battery:
1. Align the battery (not included) with the battery opening.
2. Insert the battery into the battery opening until the
battery release button (F) locks into place.
3. Push down on the battery until it locks into place. You
should hear a "click" once it is installed.
To remove the battery:
1. Press the battery release button (F) on the blower.
This will cause the battery to slightly raise out of the
tool.
2.
handle.
1
kobalttools.com
8
F