Operating Instructions - Kobalt KOC 0281-06 Manual

OPERATING INSTRUCTIONS

2. USING THE CRUISE CONTROL LEVER
This blower is equipped with two cruise control
levers, you can adjust the control lever (K) with
either hand for comfort.
• Squeeze the trigger (J) to start the unit.
• Once the unit is on, pull back the cruise control
lever (K) clockwise to increase the speed. This will
lock the speed at the desired setting.
• To decrease the speed, push the cruise control
lever (K) counterclockwise to decrease the speed
to the desired setting.
Note: The trigger will be locked at different levels
based on the position of cruise control lever.
3.USING THE TURBO BUTTON
This blower is equipped with a turbo button (L).
• Squeeze the trigger (J) to start the unit.
• To boost speed, press the turbo button (L) so that
the blower can be operated at the highest speed.
• Once the turbo button (L) is released, the blower
will return to the previous speed.
Note: When operating the blower on turbo speed,
the runtime will be reduced significantly.
4. OPERATING THE BLOWER
• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly
into the center of a pile.
• To reduce sound levels, limit the number of pieces of equipment used at any one time.
• Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen
surfaces when water is available.
• Conserve water by using power blowers instead of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills, porches, and gardens.
• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.
• After using blowers or other equipment, clean up. Dispose of debris properly.
Note: Never cover air vents. Keep them free of obstructions and debris. They must always remain
clear for proper motor cooling.
2
J
3
10
K
L