Operating Instructions - Kobalt KHB 2024B-03 Manual

OPERATING INSTRUCTIONS

1. Assembling the Blower Tube
This product requires assembly before using.
WARNING:
• To prevent accidental starting that could cause
serious personal injury, always remove the
battery pack from the tool when assembling
parts.
a. Align the release button in the blower tube
(A) with the protrusion on the blower housing.
Push the blower tube onto the blower
housing until a click is heard to signal that the
protrusion locked into place.
b. To remove the blower tube, press the release
button， and pull off the blower tube straight from the blower.
2. To Attach/Detach Battery Pack
To Attach Battery Pack
a. Make sure that the variable-speed trigger
switch (C) is in OFF position and the turbo
switch (B) is in the OFF position.
b. Align the raised portion on the battery pack
with the grooves on the bottom of the tool, and
then slide the battery pack onto the tool as
shown.
c. Ensure that the battery-release button on the
battery pack snaps into place and the battery
pack is secured to the tool before beginning
operation.
NOTICE: When placing the battery pack on the tool, be sure that the raised rib on the battery
pack aligns with the groove on the tool and the latches snap into place properly. Improper
assembly of the battery pack can cause damage to internal components.
To Detach Battery Pack
a. Make sure that the variable-speed trigger switch (C) is in OFF position and the turbo switch
(B) is in the OFF position.
b. Press the battery-release button to release the battery pack.
c. Pull upward on the battery pack to remove it from the tool.
WARNING:
• Battery tools are always in operating condition. Therefore, the switches should always in
OFF position when the tool is not in use or when carrying the tool at your side.
1
Release button
2
C
8
Battery-release
button