Preparation; Assembly Instructions - Kobalt KBB 7580-06 Manual

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.

ASSEMBLY INSTRUCTIONS

WARNING
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
ASSEMBLING THE TRIGGER HANDLE
1. Turn knob (DD) clockwise to loosen the trigger
handle (E).
2. Remove the long screw (BB).
3. Slide trigger handle (E) on the connection tube
(B).
4. Move trigger handle to desired location on
connection tube (B) before fully tightening.
5. Insert the long screw (BB) and tighten with the
knob (DD).
E
BB
10
E
DD