Preparation; Assembly Instructions - Kobalt KHB 400B-06 User Manual

SAFETY INFORMATION
WARNING (Proposition 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.

PREPARATION

Before beginning operation of this product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to operate the product.

ASSEMBLY INSTRUCTIONS

1. Nozzle
• Align the widest end of the blower tube (B) with
the front opening on the blower (A).
• Align the grooves on the blower tube (B) with the
detents on the blower (A).
• Twist the blower tube (B) clockwise until the tube
locks into position.
1
kobalttools.com
8
A
B