Seatbelts - Toyota 2010 Sienna Quick Reference Manual

Hide thumbs Also See for 2010 Sienna:
Table of Contents

Advertisement

SAFETY AND EMERGENCY FEATURES

Seatbelts

If belt is fully extended, then retracted even slightly, it cannot be
re-extended beyond that point, unless fully retracted again. This feature
is used to help hold child restraint systems securely.
To find more information about seatbelts, and how to install a child
restraint system, refer to the Owner's Manual.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to "ON" and press and hold the
"
SET" button until indicator blinks three times. Let the vehicle sit for a
few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
Note: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.
Keep as low on
hips as possible
I n f o r ma t i o n P r o v i d e d b y :
28
Take up slack
Too high

Advertisement

Table of Contents
loading

Table of Contents