Steam/Coff Ee Switchover; Cleaning And Maintenance - Saeco Xsmall Sup 033R Operating Instructions Manual

Hide thumbs Also See for Xsmall Sup 033R:
Table of Contents

Advertisement

Available languages

Available languages

way, all parts will be perfectly cleaned
and free of any milk residue.
• Place a container under the steam wand
(Pannarello, if supplied).
• When the machine is ready to brew
coffee, turn selector switch counter-
clockwise to set it onto the " " posi-
tion. Residual water may come out of the
steam wand (Pannarello, if supplied).
• The " " light blinks during the prehea-
ting time required by the machine.
• Steam dispensing will begin when the
green light " " remains steady on; soon
after only steam will begin to come
out.
• Turn the selector switch clockwise and
Blinking
set it back to the " " position to stop
dispensing steam.
• Fill 1/3 of the container you wish to use
to prepare the cappuccino with cold
milk.
Steady on
Use cold milk for better results
when preparing a cappuc-
cino.
• Immerse the steam wand (Pannarello,
if supplied) in the milk to be heated
and turn the selector switch counter-
clockwise to set it to the " " position.
Rotate the container and move it gently
up and down to obtain uniform foam.
• After dispensing steam for the desired
time, turn the selector switch clockwise
and set it back to the " " position to
stop dispensing steam.
• The same procedure can be used to heat
other beverages.
After using the steam wand (Pannarello, if
supplied), wash it as described in the "Cle-
aning and Maintenance" section.
• 9 •
To brew a coffee: Follow the procedu-
re described in section "Steam/Coffee
Switchover" to bring the machine back to
the coff ee brewing temperature.
To dispense hot water: Follow the pro-
cedure described in section "Dispensing
hot water".
machine, in order to save energy, au-
tomatically reaches the temperature
needed to dispense coff ee.
Steam/Coff ee Switchover
• After dispensing steam and pressing
Blinking fast
• To brew coffee, first drain a small
• Now follow the procedure described in
CLEANING AND MAIN
TENANCE
General Cleaning
• Empty and clean the coffee grounds
• Maintenance and cleaning operations
• Do not immerse the machine in water.
After using steam to prepare
a beverage;
If the selector switch is left
on the central position, the
"
" or "
" coff ee button, the
" " light blinks quickly to show that
the machine is overheated and cannot
brew coff ee.
amount of water.
Place a container under the steam wand
(Pannarello, if supplied) and turn the
selector switch clockwise to set it to
the "
" position. Wait for the ready
temperature " " light to be constantly
on.
Then turn the selector switch counter-
clockwise and set it back to the " "
position to stop dispensing.
the "Coffee Brewing" section to brew
coff ee.
drawer daily, with the machine turned
on.
can only be carried out when the ma-
chine is cold and disconnected from the
electric network.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents