Table of Contents
Advertisement
MAIntenAnCe
Maintenance
other Maintenance
Only MarinePC Qualified Service Personnel should perform all other maintenance except for
cleaning and power cable replacement as described.
PoWeR CabLe
To avoid shock and fire hazards, replaced Display's power cable if:
• Insulation becomes damaged, or
• A loose connection is suspected.
Protection on Servicing
Servicing - user
• User Servicing is limited to cleaning the Display
• Do not disassemble or modify the Display to avoid the possibility of electrical shock,
damage to its electrical components or scratching the Display surface, and
• Disassembly voids the warranty.
Servicing - DSe
MarinePC Qualified Service Personnel may be required to service the Display if:
• Does not operate normally when installation instructions are followed
• Does not operate normally when operating instructions are followed
• Has been dropped or damaged, or
• Exhibits a distinct change in performance, indicating a need for service.
Shipping
If Display should need to be shipped to the MarinePC Service Center, the original packing
material should be used to ensure safety of Display in shipping. Repack Display as it would
have originally been received from manufacturer.
Shipping Box Contents
The DVR is shipped in a custom box with enhanced packaging. Installer should save box and
all packaging materials in the instance Display is returned to the MarinePC Service Center.
Shipping box contents are:
• MPC-ML2DVR Display
• Cables and RAM Arm Mounting, if Ordered
SYSteM SetuP
The DVR accepts Composite Video signals; (4) RS170 Inputs; (1) RS170 Output.
InStALLAtIon
The DVR can be installed with: Front Mount (M4), Panel Mount (M4); RAM Mount (M4), Side
Mount (M4), or VESA Mount (75mm / M4). Follow known-good practices during installation.
MPC-ML2DVR-UM(A) 3/2015
9
Advertisement
Table of Contents
