General Safety Precautions - Marine PC MPC-ML2DVR User Manual

GenerAL SAfetY
Safety Icons
Safety icons are displayed throughout the User Manual to draw attention to specific User
Caution and Warning Instructions.
WaRninG! ShoCk hazaRDS
This icon is intended to tell the User of a potential risk of electrical shock.
This icon is intended to tell the User of important operating and/or
maintenance instructions.
General Safety Instructions
• Before operating the MPC-ML2DVR Display, read this User Manual thoroughly
• Keep this User Manual for future use
• Verify the system capability (see System Setup) to ensure operation of the Display
• For expeditious installation, follow these User Manual instructions in sequence
• Adhere to all Caution and Warnings on system and as stated in this User Manual
• User Manual instructions for installation and operation should be followed precisely
• Adjust only those controls covered by this User Manual's instructions; improper adjust-
ment of other controls voids Display's warranty and may result in Display damage, and
• Adhere to local installation codes.
General DISPLAY Safety
• Always disconnect Display from power source before cleaning
• Do not operate Display with a damaged cable, and
• Do not operate if Display has been dropped or damaged. Unit should be inspected by
qualified MarinePC Service Personnel.
• Power cable must be connected to a properly wired and grounded power source
• Any system to which the Display is attached must also be connected to
properly wired and grounded power sources
• Do not connect or disconnect Display during an electrical storm
• Do not open Display enclosure – there are no User serviceable parts
• Do not disassemble or modify Display to avoid possibility of electrical shock,
damage to electrical components or scratching the Display surface, and
• Disassembly of Display voids warranty.
6
MPC-ML2DVR-UM(A) 3/2015
CaUtion! inStRUCtionaL

GeneRaL Safety PReCaUtionS