Table of Contents
Advertisement
IBIt Menu
L1
INITIATE IBIT
L2
L3
L4
L5
Initiate BIt (IBIt) Menu
The DVR supports a Built-In-Test component, Initiate BIT (IBIT) (Figure 22). This process
detects and isolates faults to help the user identify the operational readiness, or where nec-
essary, identify degraded or failed system conditions. Results of failures are stored in mem-
ory. Access to the IBIT screen is through the Main Menu, Figure 8.
InItIAte IBIt (L1).
functioning. Results are shown as counts per category in the test log box in the center of
the display screen. Select INITIATE IBIT (L1) to start the process (Figure 22).
teSt LoG BoX fIeLDS.
• Version of IBIT test run
• Lists the overall result of last IBIT test: PASS or FAIL
• TOTAL: Lists the total ERROR count from unit's initial Power ON (manufacture date)
• SESSION: Lists the ERROR count from unit's current Power ON session, and
• Lists an Error Code (See ERROR CODES, TABLE 10).
error CoDeS
. If there are conflicts within the DVR, they may be indicated by one or more
of the following ERROR CODES (see TABLE 10).
BACK (r5).
Returns to Main Menu (Figure 8).
34
MPC-ML2DVR-UM(A) 3/2015
SRC
T1
VeR: XX
LaSt ReSULtS: PaSS/faiL
eRRoR
RaM
RoM
CoMM
eeP
DeViCe (1)
DeViCe (2)...
DVR
B1
Running Initiate BIT (IBIT) allows the user to confirm all systems are
The Test Log Box Fields indicate the following:
T2
T3
T4
totaL
<Cnt t> <Cnt S>
<Cnt t> <Cnt S>
B2
B3
B4
figure 22
T5
SeSSion
BACK
B5
R1
R2
R3
R4
R5
Advertisement
Table of Contents
