Table of Contents
Advertisement
utILItY Menu
L1
FACTORY RESET
FACTORY RESET
L2
PROGRAM BTN
L3
BTN TEXT (menu)
L4
STARTUP
L5
Comm
utility Menu
From the Main Menu (Figure 8), the Utility Menu (Figure 23) is accessed through R1.
fACtorY reSet (L1).
• VIDEO SOURCES: All ENABLED; Composites (RS170) (4)
• SERIAL COMMUNICATIONS PORTS: Sets to RS232
• NVIS COLOR (If Option is installed): Sets to GREEN
• CONTRAST: Resets to a predetermined factory setting, and
• KEY DOWN/KEY UP: Restores to Text List (See Section Communication Protocol >
Factory Default Key Down and Key Up Transmit Text).
• BUTTON TEXT: restores to Always ON.
ProGrAM Btn (L2).
Btn teXt (Menu) (L3).
a menu or following a button press. Cycle through the options of 1: Always ON (default).
2: Hide. 3: Timeout 3 sec. 4: Timeout 5 sec. 5: Timeout 7 secs.
StArtuP (L4).
Opens Startup Menu (Figure 26).
CoMM (L5).
Opens Communications Options Menu (Figure 28).
DAte (r1).
Opens Date Adjust Menu (Figure 24).
tIMe (r2).
opens time Adjust Menu (figure 25).
BACK (r5).
Returns to Main Menu (Figure 8).
36
MPC-ML2DVR-UM(A) 3/2015
SRC
T1
T2
B1
B2
Select FACTORY RESET to reset to factory defaults:
Initiates Programmable Softkey (Setup) Menu (Figure 29).
Supports OSD timeout options of Button Label Text after opening
T3
T4
B3
B4
figure 23
T5
Date
Time
BACK
B5
R1
R2
R3
R4
R5
Advertisement
Table of Contents
