Switch Settings; Led Indicators - Bosch ISC-PPR1-W16G Installation Instructions Manual

3.0 Switch Settings

3.1 Switch 1 - Walk Test
Voltage on WT
Switch 1
ON
ON
OFF
OFF
The Remote Self Test automatically occurs when the walk
test changes from a disabled to enabled by a change in the
voltage on the WT terminals.
A passing Remote Self Test responds with an
alarm signal.
The Remote Self Test must be connected to 0 or +12 VDC
on UL listed Control Panels.
3.2 Switch 2 - Alarm Memory Polarity
Voltage on S/U
Switch 2
ON
ON
OFF
OFF
The Alarm Memory must be connected to 0 or +12 VDC on
UL listed control panels.
4
Walk Test
Terminal
0 ON
+12 OFF
0 OFF
+12 ON
Alarm Memory
Terminal
+12 ON (Locked)
0 OFF (Unlocked)
0 ON (Locked)
+12 OFF (Unlocked)
3.3 Switch 3 - Short Range/
Long Range
Switch 3
ON
OFF

4.0 LED Indicators

Color Indication
Blue Steady ON
Flashing 1/4
Blue sec ON, 1/4
sec OFF
Blue 4 Flashes
Blue 5 Flashes
© 2009 Bosch Security Systems, Inc.
Range Distance
Short 25 ft (8 m)
Long 50 ft (16 m)
Function
New alarm detected
Alarm Memory
Self Test/
Self Test failure
Low Input Power