Panasonic DP-3510 Service Manual page 311

Note:
1. For USA and Canada only, this option can also be used for DP-3510/4510/6010 without IPX/SPX.
2. The Firmware included on the CD-ROM with this option is intended for DP-3530/4530/6030, it cannot
be used for DP-3510/3520/4510/4520/6010/6020. Please use the DP-3510/3520/4510/4520/6010/
6020 firmware provided separately by the local Sales Company or Download it from the Web.
Ver. 5.2
(3) Install the Hardware Key into one of the three
available connectors (CN67, CN68 or CN69) on
the SC PC Board.
Note:
The connectors are keyed, to prevent damage to
the SC PC Board, install the Hardware Key as
illustrated. Do not force the Hardware Key into the
connector if facing the wrong way.
(4) Proceed with the installation of other options.
(3)
If finished, close and secure the Rear Plate and
reinstall remaining Covers.
(5) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
(6) Update the firmware of the unit to the PS/PCL
Option firmware. Refer to the "Service Notes".
(7) Install the PS/PCL6 Printer Driver and NetWare
SetupWizard into the PC with the Operating
Instructions by following the prompts of the
Installation Wizard.
(8) Attach the Adobe Postscript 3 Label to the Front
Cover as illustrated.
311
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
JAN 2006