10
When done, select
OK
at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
11
When the connection has been verified, the
message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a
WPS(PBC)
button, follow these steps.
1
Go to MENU m →
Network
→
Network
2
Select WPS(PBC), press E, and then press E again.
3
Press the
WPS(PBC)
button on your router within 2 minutes. Your product automatically acquires all
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
"Your wireless network is set up and ready to
Settings.
use."
79