― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than

the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.

― Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical

frequency to 60Hz using the CDT product before you exchange it with the LCD product.

Model Name

Synchronization

Horizontal Frequency

Vertical Frequency

Resolution

Optimum resolution

Maximum resolution

The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC

does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by

referring to the graphics card user manual.

― PC mode is not support interlaced signal.

Resolution

Horizontal Frequency

(kHz)

IBM, 720 x 400

31.469

MAC, 640 x 480

35.000

VESA, 640 x 480

31.469

VESA, 640 x 480