Samsung EB40D User Manual page 78

6
When done, use the down arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
― This product cannot connect to the Internet via
7
When the connection has been verified, the
message appears.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask and gateway. Enter these
values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
Soft AP (Wi-Fi Hotspot) Wi-Fi Direct.
or
"Your wireless network is set up and ready to
How to set up manually
On the product, go to MENU m →
― If you are using multiple products, make sure to change their device names.
1
Go to MENU m → Network
use."
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the u or d button to select a network, and then press the E button.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
The Add Network button appears.
Add Network
Select to add a wireless router to connect to.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the
6
When done, use the down arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
IP Settings
Select on network connection screen. The
9
Select the field at the top, press E, and then set
process for each field in the
→
Network Device Name and change the product's device name.
→ Network Settings.
Refresh
to search again.
Stop
button.
Enter password.
(Security key or PIN).
IP Settings
screen appears.
IP Settings to Enter
IP Address.
manually. Repeat the entry
78