Linking driving position memory with door unlock operation
(vehicles with smart key system)
Memorized driving positions can be recalled when you unlock the
driver's door using the entry function or wireless remote control and
open the driver's door.
■
Setting the linked door unlock operation
STEP
1
Set the driving positions into the memory system using the "1"
or "2" buttons. (→P. 63)
STEP
2
Turn the "ENGINE START STOP" switch OFF, then close the
driver's door.
STEP
3
STEP
4
Open one of the doors.
If a door is not opened within 60 seconds after
doors will be locked again and the alarm will automatically be set.
In case that the alarm is triggered, immediately stop the alarm.
(→P. 99)
1-3. Adjustable components (seats, steering wheel, mirrors)
I n f o r ma t i o n P r o v i d e d b y :
Push the "1" or "2" button on the
driver's side and the
on the wireless remote control at
the same time for about 1 sec-
ond until you hear a beep.
button
is pressed, the
65
1