Toyota 2012 Avalon Owner's Manual page 362

3-7. Other interior features
■
Deviation calibration
STEP 1
Stop the vehicle where it is safe to drive in a circle.
STEP 2
STEP 3
Press the switch, and referring to the map above, select the
number of the zone where you are.
STEP 4
Wait a few seconds until the compass direction is displayed.
The calibration is complete.
■
Circling calibration
382
Press the switch until a number
(1 to 15) appears on the com-
pass display.
If "CAL" appears on the display,
drive the vehicle at 5 mph (8 km/h)
or less in a circle until a direction
is displayed.
If there is not enough space to
drive in a circle, drive around the
block until the direction is dis-
played.
I n f o r ma t i o n P r o v i d e d b y :