Toyota 2012 Avalon Owner's Manual page 34

■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
STEP 1
Vehicles with smart key system: Close all the doors and turn
the "ENGINE START STOP" switch to IGNITION ON mode.
(Perform
Vehicles without smart key system: Close all the doors and
turn the engine switch to the "ON" position. (Perform
within 10 seconds.)
STEP 2
1-2. Opening, closing and locking the doors and trunk
STEP 2 within 10 seconds.)
I n f o r ma t i o n P r o v i d e d b y :
Shift the shift lever to "P" or "N",
press and hold the driver's door
lock switch ( or
seconds then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
1
STEP 2
) for about 5
to the
51