Control Of Substances Hazardous To Health; Maintenance And Servicing - Navien NCM-1130HH Installation Instructions Manual

Gas fired waa mounted stirling engine m-chp
Table of Contents

Advertisement

1.4 Control of Substances Hazardous to Health

Note the following information on substances hazardous to health.
Adhesives and Sealants
The NCM-1130HH product employs a range of adhesives and sealants in its construction. These
substances are fully cured and give no known hazard in this state.
Insulation Pads, Fire Insulation
Refectory ceramic and ceramic fibre insulation is used in a number of places within the product.
These materials can cause irritation to skin, eyes and the respiratory tract.
If you have a history of skin complaints you may be susceptible to irritation. High dust levels are
usual only if the material is broken or handled.
In normal use of the product these materials are not accessible to the user and represent no
hazard. For servicing and maintenance operations likely to disturb the ceramic fibre parts, the
appropriate safety precautions should be taken before starting work.
If you do suffer irritation to the eyes or severe irritation to the skin, seek medical attention.

1.5 Maintenance and Servicing

Maintenance and servicing must only be carried out by KD NAVIEN trained persons. The product
will require regular maintenance and periodical inspection. It is the responsibility of the user to
ensure adequate access to the product by KD NAVIEN Service personnel to allow this
maintenance to take place in a timely manner.
8 of 88
Navien stirling engine m-CHP installation manual
Page No:

Advertisement

Table of Contents
loading

Table of Contents