Table of Contents
Advertisement
Diagram 4.1 Diagram showing cut away wall with m-CHP mounted
7) The Fischer Rawl bolts currently supplied by KD NAVIEN to secure the wall mounting bracket
to the wall must be used in all cases
8) Set drill stop at depth of 90mm
9) Drill an 8mm diameter hole into the wall, using rotary hammer drill in conjunction with SDS
drill bit.
10) Thoroughly clean the hole of dust and drill debris
11) Push the FUR 8X80 T frame fixing into the hole through wall mounting bracket and make
sure that the collar of the nylon plug is flush with wall mounting bracket.
12) Tighten the coach screw with T30 screw driver bit
Navien stirling engine m-CHP installation manual
24 of 88
Page No:
Advertisement
Table of Contents
