BMW K 1200 R Rider's Manual page 116

• Press the bulb into its socket
6
and turn it counter-clock-
wise to remove.
114
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
Replacing front/rear turn
indicator bulbs
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.
• Remove screw 1.
• Pull the lamp housing on the
screw connection side out of
the turn indicator housing.
• Press the bulb 2 into the
fitting 3 and remove it by
turning it counter-clockwise.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.