BMW K 1200 R Rider's Manual page 114

The bulb is pressurized
6
and can cause injuries
when damaged.
112
Wear protective goggles and
gloves when changing
bulbs.c
Turn the handlebars to
the left to facilitate
access.c
• The high-beam bulb is
changed like the low-beam
bulb. However, the high-
beam bulb is secured with a
single-leg, vertical spring clip.
Replacing parking light
bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.
• Remove the securing
screws 1 on both sides of
the light housing.
• Pull out the light housing
toward the front and tilt it
slightly downward.
• Remove the bulb holder 2
from the headlight housing
by turning it counter-clock-
wise.
• Pull the bulb 3 from the bulb
holder.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.