Operation; Control Panel Features; Special Function Buttons; Option Button - LG WM3885H*CA Service Manual

5. OPERATION

5-1. CONTROL PANEL FEATURES

WM3885H*CA / WM3875H*CA / LSWF3885HVS
A
POWER ON/OFF BUTTON
A
Press to turn the washer ON. Press again to turn the washer OFF.
NOTE: Pressing the ON/OFF button during a cycle will cancel that
cycle and any load settings will be lost.
B
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once the desired
cycle has been selected, the standard presets will be shown in
the display. These settings can be adjusted using the cycle
setting buttons anytime before starting the cycle.
C
START/PAUSE BUTTON
Press this button to START the selected cycle.
washer is running, use this button to PAUSE the cycle without
losing the current settings.
NOTE: If you do not press the START/PAUSE button within 4
minutes of selecting a cycle, the washer automatically turns off.
STEAM BUTTON
D
Press the STEAM button to add steam to the selected cycle
for added cleaning power.
NOTE: Steam can be added to only the following cycles:
STEAM FRESH™, ALLERGIENE™, SANITARY, BRIGHT
WHITES™, BULKY/LARGE, PERM. PRESS,
COTTON/NORMAL, HEAVY DUTY and TOWELS.
DELAY WASH BUTTON
E
Press this button to delay the start of the wash cycle. Each
press of the button increases the delay time by one hour, up
to 19 hours.
B
C
If the
E F D
F

SPECIAL FUNCTION BUTTONS

The special function buttons allow you to select additional
functions and will light when selected. Certain buttons
also allow you to activate secondary functions by pressing
and holding the button for 3 seconds. For detailed
information about the individual functions, please see the
following pages.
G

OPTION BUTTON

Press this button to select additional cycle options such as
WATER PLUS, PRE WASH and ENERGY USAGE
DISPLAY.
Press the button next to the desired option in the display
to select. The button will light to show the option has been
selected.

LCD DISPLAY

H
The display shows the settings, estimated time remaining,
options, and status messages for your Steam Washer™.
The light in the display will remain on through the cycle.

CYCLE SETTING BUTTONS

I
Use these buttons to select the desired cycle options for
the selected cycle. The current options are shown in the
display. Press the button for that option to view and select
other settings.
13
H
I G
F