D-Link DNS-320L User Manual page 82

Section 4 - Configuration
Go to Management>>Disk Management>>Hard Drive Configuration.
There will be two options available: Set RAID Type and Re-Format or Format
the new drive as Standard type
The images below shows the configuration steps for each procedure.
Once you have selected the required configuration procedure, click Next to
continue.
Set RAID Type and Re-Format.
If you choose the first option, "Set RAID Type and Re-Format", you can con-
figure the new disk volume as two standard disks; JBOD, RAID 0, and RAID 1,
but all data on the disk volume will be erased. Please backup all data before
taking this action. If you select the second option, "Format the new drive as
Standard type", the data on the original disk will remain.
Format the new drive as Standard type.
D-Link ShareCenter DNS-320L User Manual 76