Rear Panel - D-Link DNS-320L User Manual

Section 1 - Product Overview
Power Receptor
COMPONENT
Power Receptor
Latch
Cooling Fan/Outlet
USB Port
Gigabit Ethernet Port
D-Link ShareCenter DNS-320L User Manual
DESCRIPTION
Connect the supplied power cord to the receptor.
Press the latch to release the top panel for inserting or removing the hard drives.
The cooling fan cools the hard drives and features speed control. When the unit is first powered on, the fans
rotate at a low speed and later rotate at a high speed when the temperature inside the unit rises above 49 °C. Do
not cover or obstruct this outlet.
A single USB 3.0 (type A) connector. The USB Host port is for Printers, USB storage, or UPS monitoring.
Use the Gigabit Ethernet port to connect the ShareCenter to your local network. The port is equipped with 2 LEDs.
The LED on the left will illuminate solid green for a good connection and will blink during data transmission. If this
LED is off, check the connection/cable to the device you are connecting to. The LED on the right will light solid for a
Gigabit connection and will remain off when connected to a 10/100 Mbps device.

Rear Panel

Latch for Top Panel
Cooling Fan/Outlet
Gigabit Ethernet Port
USB Port
9