D-Link DNS-320L User Manual page 300

Section 4 - Configuration
COMPONENT
Motion Detection
Copy
Quota Settings
Automatic Overwrite
Quota
Keep the File within
Estimate Required
Space
Event Record: Pre-re-
cord
Event Record: Post Re-
cord
Record Mode
Record Mode
Record Mode
D-Link ShareCenter DNS-320L User Manual
DESCRIPTION
When using the Record by Schedule mode together with the Motion Detection function, you
must first click the Go to Web link and log in to the camera's web interface and enable the mo-
tion detection function on that camera. Please refer to the manual of your camera for more infor-
mation on enabling motion detection.
Copy the camera recording setup to other similar cameras.
Configurable per camera. Indicates the maximum amount of disk space will be used for record-
ings.
Click this checkbox if you wish to overwrite the earliest recorded video with the latest video if
reaches the quota limitation or disk space is full.
Click this checkbox to set the amount of storage you want to allocate to each camera. Next to it is
displayed the remaining free disk space.
This indicates how long you want to keep the recorded camera video files before it is overwritten.
Click this button to find out how much disk space is required for video storage with the current
settings.
If required, select how long video should be recorded for prior to an event alarm being triggered
(1-180 seconds).
If required, select how long video should be recorded for following an event alarm being trig-
gered (1-180 seconds).
No Record - no recording is made.
Record by Schedule - Drag and drop on the weekly map below.
• Always Record means that the camera will always record for the specified period.
• Motion Detection Record will wait for motion on the camera to be detected before it
begins recording.
• Event Record will wait for event on the camera to be triggered before it begins recording.
Manual Record - requires you to manually click a record button to begin recording.
294