Troubleshooting - Sony SRP-X100 Operating Instructions Manual

Troubleshooting

Power will not turned on.
No sound.
No sound from microphone.
• No microphone audio from MASTER
OUTPUT.
• No audio from equipment connected to line
level -stereo system from SUB OUTPUT.
No ST3 input audio from REC OUTPUT.
Audio does not sound like stereo.
Sound is distorted.
12
Troubleshooting
Has AC power cord been pulled out?
• Is INPUT knob set to MIN?
• Is OUTPUT knob set to –
Was INPUT LEVEL Selector button mistakenly set to LINE (instead of MIC)
for microphones connected to MONO 3 - 6. (page 8)
Was SEPARATE button set to ON (R)? (page 8)
Signal from ST3 does not output to REC OUTPUT. (page 7)
Is the MODE button set to STEREO? (page 7)
• Is PEAK indicator lighting up? (page 7)
• Was INPUT LEVEL Selector button set to MIC (instead of LINE) for line
equipment connected to MONO 3 - 6? (page 8)
?