Specifications - Sony SRP-X100 Operating Instructions Manual

Specifications

Item
Frequency response
(LINE/STEREO-IN)
Total harmonic distortion (T.H.D.)
Residual noise level
Equivalent input noise
Crosstalk
INPUTS/OUTPUTS
Connector Connector type
1)
MONO IN XLR3-31
STEREO IN PHONO
REC OUT PHONO
SUB OUT PHONO
MASTER OUT XLR3-32
1)
0dBu=0.755V MONO 1 - 2: MIC level only
MONO 3 - 6: MIC level or LINE level selectable
OTHERS
+48 V Power supply
Power requirements
AC 120/230V (switch selectable)
50/60Hz
Power consumption
19W
Peak inrush current
(1) Power ON, current probe method: 1 A
(240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 1 A
(230 V)
482 × 44 × 175 mm (width/height/depth)
Dimensions
not including max protrusion
Mass Approx. 2.6 kg
°
Operating temp. 0 C to 40
°
Storage temp. 20 C to +60
–
Supplied accessories
Operating instructions (1)
For US and Canada: AC power cord (1)
For other areas: AC power cord (2)
(EURO type and US type)
10
Specifications
Conditions
20Hz to 20kHz, 1kHz fundamental, MASTER OUT
5Hz to 100kHz, 1kHz fundamental, MASTER OUT
MONO IN-MASTER OUT, 1kHz –44dBu input
STEREO IN-MASTER OUT, 1kHz +4dBu input
STEREO IN-MASTER OUT, 1kHz –10dBu input
ch fader: - MASTER VOL: 0
MONO IN input terminal at 150Ω IHF-A
1kHz across L-R
1kHz across channels
1kHz across MAX-MIN (ch fader)
Channel
6
3 (Stereo)
1 (Stereo)
2
1 (Stereo)
MONO 1 - 6 jacks (MONO 3 - 6 are only during Mic level settings)
°
C
°
C
MASTER OUT IHF-A
Reference I/O Level Max I/O Level
MIC: –60dBu MIC: –30dBu
LINE: +4dBu LINE: +24dBu
–10dBu +10dBu
–10dBu +10dBu
–5dBu +15dBu
+4dBu +24dBu
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Standard
+0.5dB/–1dB
+0.5dB/–2dB
less than 0.01%
less than 0.005%
less than 0.005%
less than –83dBu
less than –126dBu
less than –70dB
less than –80dB
more than 90dB
I/O Impedance
MIC: more than 2.2kΩ
LINE: more than 10kΩ
more than 47kΩ
less than 470kΩ
less than 470kΩ
less than 47Ω