Problems, Probable Causes And Corrective Actions - Krups XP4600 User Manual

10. PROBLEMS, PROBABLE CAUSES AND
CORRECTIVE ACTIONS
Problems Possible causes
The espresso The cups and the
is not hot filter holder are
enough. cold.
The filter
You forgot to unlock
holder is
the filter.
locked.
You have not
The grounds
tightened the filter
are not dry
holder properly.
after water has
run through.
You have tightened
the filter holder too
much.
The ground coffee
is too fine, too oily
The coffee
or floury.
flows too
slowly.
The filter holder is
dirty.
The water drip-
through grid is
clogged.
No water in the tank.
The tank is not
properly in place.
The water
The filter is clogged.
does not run
The ground coffee
through.
is too fine.
Your machine needs
to be descaled.
The dial has not been
Water leaks
returned to the
from the filter
position.
holder after an
Your machine needs
espresso has
to be descaled.
been made.
Solutions
Preheat the accessories: cups and
filter holder (see paragraph 5).
Press « » while turning the filter
holder to the left.
Tighten the filter holder by turning it
to the right as far as it will go.
Loosen it slightly.
Choose a larger grind of coffee.
Clean your filter holder (see
paragraph 8).
When the machine has cooled,
clean the brewing head with a
clean damp cloth
Fill the tank.
Replace the tank in the correct
position.
Clean the filter holder (see Section
8) and try a larger grind of coffee.
Descale the machine (see Section 9).
Turn off your machine by moving the
dial back to the
Descale the machine (see Section 9).
English
(fig.22)
.
(fig.10)
position .
23