Operation - nubeca PO8201 Owner's Manual

OPERATION

All functions of the oximeter are controlled by
front of the unit.
STEP 1. Turn on the oximeter by press
The LED Screen shows as above to indicate the oximeter is ready to use.
STEP 2. Clip subject's finger as below:
CAUTION!
1. Consult health professional before you start to use the oximeter.
2. The oximeter probe might not work on cold extremities due to reduced circulation.
Warm or rub the finger to increase circulation, or reposition the probe.
3. Check the probe application site frequently to determine circulation, positioning
and skin sensitivity. The recommended maximum application time at a single
site is 4 hours.
and
Button.
20
buttons found on the