Power On Self-Test - nubeca PO8201 Owner's Manual

Setting Table
Alarm Limit
SpO High
2
SpO Low
2
Pulse Rate High
Pulse Rate Low
Brightness

►Power On Self-Test

When the oximeter is turned on for normal operation, the unit will check if the
oximeter is ready for use. If probe does not connect to oximeter, the SpO
will appear red light. If probe does not touch the subject's measurement site or the
signal is unstable, the SpO
Default Adjustment Options
Off
Off
Off
Off
L1
indicator will turn orange light.
2
19
Handheld Pulse Oximeter
Off, 91-100
Off, 85-94
Off, 105-250
Off, 30-100
L1 and L2
Increments
1%
1%
5 BPM
5 BPM
N/A
indicator
2