Low Battery Indicator; Pulse Rate - nubeca PO8201 Owner's Manual

1. Low Battery Indicator

Red light appears when power is insufficient to the oximeter.
2. SpO Indicator
2
Red light appears when probe disconnects from oximeter. Orange light appears
when probe does not connect properly with the subject or the signal is not detected
stably.
3. Set Button
Is used to set up settings and keep the oximeter silence when it is alarming.
4. Advance Button
Is used to review status or adjust alarm volume.
5. On/Off Button
Is used to turn on or turn off the oximeter by pressing On/Off button.
6. SpO %
2
The measurement result of oxygen saturation in percentage.
7.

Pulse Rate

The measurement result of pulse rate.
8. Pulse Amplitude
The strength of the signal is detected by the oximeter.
9. LED Screen
Display measurement results.
10. Oximeter Sensor Port
Connect the probe and the oximeter.
10