Set Up The Oximeter - nubeca PO8201 Owner's Manual

►Set up the Oximeter

Your oximeter comes with the alarm function including the upper/lower limit of SpO
and heart rate, and the brightness of LED backlight preset. If you need to set these
parameters, please follow below steps.
Start with the oximeter is off.
STEP 1. Press
The first screen shows SpO
STEP 2. Press
the number from 91% to 100%.
When the setting value goes to the upper limit, press
the screen will turn back "OFF" setting.
Button and button at the same time to enter setting mode.
2
button to change settings. You can press
upper limit settings. The factory default is off.
14
2
button to increase
button again and