Subaru 2003 LEGACY Service Manual page 23

11) Cut off cartridge nozzle tip and set it in sealant
gun as shown.
10
(0.39)
15
(0.59)
(1) Unit: mm (in)
12) Apply adhesive to glass end surface as shown.
13) Fit matching pins using suction rubber cup to
install windshield glass.
14) Lightly press windshield glass for tight fit.
15) Make adhesive surface flush using spatula.
16) After completion of all work, allow vehicle to
stand for about 24 hours.
NOTE:
For minimum drying time and time the vehicle must
be left standing before driving after bonding, follow
instructions or instruction manual from the adhe-
sive manufacturer.
17) After curing of adhesive, pour water on external
surface of vehicle to check that there are no water
leaks.
NOTE:
When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
18) Install cowl panel. <Ref. to EI-27, INSTALLA-
TION, Cowl Panel.>
WINDSHIELD GLASS
12 – 15
(0.47 – 0.59)
( 1 )
GW-00115
GW-00116
GW-21
GLASS/WINDOWS/MIRRORS