Table of Contents
Advertisement
Maintenance & Care
When you're done
1. Turn power lever OFF.
2. Unplug power cord from outlet.
3. Remove and empty collection tank.
a. Release collection tank latches
[1 each side] by pulling up from bottom
of latch and then out.
b. Carefully lift collection tank from
lower body.
c. Carry collection tank to a toilet or sink.
To empty, pour out contents using opening
at back of tank.
d. Rinse collection tank thoroughly.
e. Remove lint and hair from red gasket
in base of unit. (Do not remove gasket)
4. Clean nozzle window by lifting latch and
removing from machine. Rinse under running
water. When finished replace nozzle and
secure with latch.
5. Replace collection tank on lower body
and secure with latches.
6. Wrap power cord around Quick Release
Cord Wrap™ on side of deep cleaner.
7. Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
NOTE: You may have cleaning solution remain-
ing in the clean water/solution tank. You may
store your deep cleaner this way for the next
cleaning task, but never keep soiled solution in
the collection tank.
www.BISSELL.com
8
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
CAUTION
Do not store unit where freezing may occur. Damage
to internal components may result.
Hide quick links:
Advertisement
Table of Contents
