Panasonic Viera TX-P42VT30E Operating Instructions Manual page 24

Menu Item
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
MPX
Audio Preference
SPDIF Selection
HDMI1 / 2 / 3 / 4 Input
SPDIF Delay
Reset to Defaults
Timer Programming
Off Timer
Auto Standby
24
Adjustments / Configurations (alternatives)
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio] :
Provides a dynamic enhancer of width to simulate improved spatial effects
[V-Audio Surround] :
Provides a dynamic enhancer of width and depth to simulate improved spatial effects
[V-Audio ProSurround] :
Provides a more progressive enhancer and reverberation to simulate improved spatial
effects
Adjusts the current volume level if it is extremely different from the previous viewed
channel or input mode [Off] / [On]
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound [Over 30cm] / [Up to 30cm]
Selects multiplex sound mode (if available)
[Stereo] : Use this normally
[Mono] : When stereo signal cannot be received
[M1] / [M2] : Available while mono signal is transmitted
Selects the initial setting for audio tracks [Auto] / [Multichannel] / [Stereo] / [MPEG]
[Auto] : Automatically selects the audio tracks if programme has more than two tracks.
The priority is given in the following order - Dolby Digital Plus, HE-AAC, Dolby
Digital, MPEG.
[Multichannel] : The priority is given to multi-channel audio track.
[Stereo] : The priority is given to stereo (2ch) audio track.
[MPEG] : The priority is given to MPEG.
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
Select to fit the input signal [Digital] / [Analogue]
[Digital] : HDMI cable connection
[Analogue] : HDMI-DVI adaptor cable connection
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARC
function) terminals if the sound does not synchronize the image
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
Sets a timer to remind watching or record forthcoming programmes
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times [Off] / [2] / [4] (hours)