Panasonic Viera TX-P42VT30E Operating Instructions Manual page 20

Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
[3D Mode Selection]
Source
image format
Frame Sequential
Side by Side (Full)
Side by Side
Top and Bottom
Normal format (2D)
∗ 1 : When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed without
3D effect.
•
Depending on the player or broadcasts, the image may be different from the above illustrations.
Available range for the 3D Eyewear
If the 3D Eyewear is placed outside the coverage area for about 5 minutes, the 3D Eyewear will be turned off automatically.
: Coverage area for using the 3D Eyewear
Approx.
3.2 m
View from the top
Note
•
You cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving infrared signals
from the TV.
•
The range may be shortened depending on the obstacles between the infrared sensors on the TV and the 3D Eyewear, the
dirt on the infrared sensors or the surrounding environment.
•
If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off automatically
even if in the coverage area.
•
There are differences in the viewing range of the 3D Eyewear among individuals.
•
The 3D Eyewear may not operate correctly at the outside of the viewing range.
20
[Original]
Approx.
35° 35°
3.2 m
[Frame
Sequential
- 3D]
Normal 3D ∗
1
Approx.
3.2 m
[Side by Side [Top and
- 3D] Bottom - 3D]
Normal 3D ∗
1
Normal 3D ∗
1
Normal 3D ∗
Approx. 3.2 m
20°
20°
View from the side
[2D 3D]
1
Normal 3D