Panasonic Viera TX-P42VT30E Operating Instructions Manual page 19

To view the 3D images
You can enjoy the 3D images in a variety of ways.
(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)
■
Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
•
Connect the 3D-compatible player via a fully wired HDMI compliant cable.
•
If input mode is not switched automatically, select the input mode connected to the player.
•
If you use the non 3D-compatible player, the images will be displayed on 2D mode.
■
3D-supported broadcast
•
Please consult the suppliers of contents or programmes for availability of this service.
■
3D photos and 3D videos taken by 3D-compatible Panasonic products
•
Available in Media Player and Network services
■
2D images converted to 3D
Set to [2D 3D] mode in [3D Mode Selection]
Turn the 3D Eyewear on
1
Put on the 3D Eyewear
2
Watch the 3D images
3
•
Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view 3D
images.
If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off switch is next
turned On. Select [No] if you do not wish to display this message again.
Turn off the 3D Eyewear after using it
4
Changing 2D - 3D mode
You can easily change the viewing mode between 2D and 3D using the 3D button.
Select the mode
3D Mode Selection
2D
3D
2D
[3D] / [2D] / [2D 3D] :
Displays the appropriate image that you desire without selecting 3D format
•
This mode may not work properly depending on the source image format. In this case, select the appropriate 3D format
manually.
■
To change 3D format manually
When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.
During the above operation
(red)
3D
Select the mode
3D Mode Selection (Manual)
Original
Frame Sequential - 3D
Frame Sequential - 2D
Side by Side - 3D
Side by Side - 2D
Top and Bottom - 3D
Top and Bottom - 2D
2D
select
set
3D
•
Items of [3D Mode Selection] vary
depending on the condition.
select
set
19